|
Showcase for your mouthpieces.
|
 |
Those cases are designed and hand made by myself.
Strong vintage latch.
|
 |
|
This showcase will highlight your favorite mouthpieces.
|
 |
The box frame is in white pine wood, assembled in finger joint.
This traditional method is known for its strength and lightness.
|
 |
The top and the bottom are in plywood for stability.
Water resistant varnish.
The hinge axis is in steel.
|
 |
The inside is completely pad with egg-box faced foam.
This structure helps protect mouthpieces against stresses exerted during transportation and storage by absorbing shocks.
|
 |
|
A luxurious extremely soft red velvet completes the internal arrangement.
|
 |
|
|
 |
|
The egg carton foam hold mouthpieces in place and blocks any movement when the case is closed.
|
 |
|
The sides are paded. A joint offers a slight tightness and regulates the thermal shocks caused when you go out of a heated room in winter.
|
 |
The foam has a thickness of 30mm (bottom 10mm, alveolus 20mm) at the bottom and at the top and a density of 30kg / m3.
External dimensions : 400 x 300x 75mm.Internal dimensions: 340 x 240. Weight: 580g.
|
 |
Mouthpiece with ligature and cap maximal height: 50mm.
This case fits 8 baritone mpc or 13 tenor mpc or 14 alto mpc or 17 soprano mpc, but also 15 clarinet mpc or 12 bass clarinet mouthpieces.
Of course, you can mix them.
|
|
Bumper anti-slip feet.
|
 |
|
I can customize the internal volume to your needs ( saxophone necks, clarinet barrel, brass mouthpieces).
|
